Factory direct — 40–60% below Megger / BAUR list pricing · Worldwide shipping · Request a quote
TriEdge TechnologiesTriEdge Technologies Get a Quote

How to Locate an Underground Cable Fault: Step-by-Step Guide


Underground cable faults are invisible from the surface. A faulted feeder can be buried under pavement, soil, or concrete and finding the exact location without the right method can turn a simple repair into days of guessing and digging.

This guide explains the professional cable fault location process used by power utilities and electrical contractors worldwide:
pre-location → conditioning (if needed) → pinpointing.

Step 1: Pre-Location (Find the Distance to the Fault)


Pre-location answers one question: how far down the cable is the fault?

The standard tool is a Time Domain Reflectometer (TDR). It sends a pulse down the cable and measures the time it takes for the reflection to return. Because the pulse travels at a known speed, the distance to the fault can be calculated to within a meter.
TDR pre-location works best on:

  • Low-resistance faults (short circuits, ground faults)
  • Open circuits (broken conductors)
  • Cable length measurements

The result narrows the search from somewhere in this 2 km feeder to around meter 780.
Recommended equipment: A professional TDR like the A10 Cable Fault Flash Tester with 0.5 m accuracy and up to 100 km range.


Step 2: Fault Conditioning (For High-Resistance Faults)


Some faults  especially old, weathered, or intermittent ones  have such high resistance that a TDR pulse cannot see them.
They need to be "conditioned"  first.

A high-voltage power supply (such as the G35, up to 32 kV) applies a controlled voltage to the fault. This burns down the high resistance connection into a low-resistance arc that a TDR or pinpointer can then detect.
When is conditioning needed?

  • Fault resistance above a few hundred ohms
  • Intermittent faults that only appear under stress
  • Water-tree damaged cables
  • Sheath faults on PILC (paper-insulated lead-covered) cables

Step 3: Pinpointing (Find the Exact Location on the Ground)


Pre-location tells you meter 780. Pinpointing tells you exactly where to dig.
The most common tool is an acoustic-magnetic pinpointer. It detects two signals simultaneously:
1. The acoustic signal - the audible thump of the fault discharging
2. The magnetic signal - the electromagnetic pulse that travels to the fault

Where the two signals align on the ground is the fault location. Professional pinpointers like the C11 Acoustic-Magnetic Pinpointer narrow the dig point to under half a meter, saving hours of excavation.


Step 4: Verify Before You Dig


Once pinpointed, the location should be veried:

  • Mark the exact spot on the surface
  • Re-test with the TDR to confirm the distance matches
  • If excavating near other utilities, use a cable and pipeline locator (like the R30) to confirm the cable path and avoid hitting neighboring services
  • Always verify the cable is de-energized with a safety piercer (like the Z20) before excavation

The Complete Toolkit


A professional fault location job typically uses 3–4 tools:

Step Tool Example
Pre-location TDR A10 Flash Tester
Conditioning HV Power Supply G35 32kV
Pinpointing Acoustic-Magnetic Pinpointer C11 Pinpointer
Safety Cable Locator + Piercer R30 Locator + Z20 Piercer


Complete portable systems that bundle these steps are available from TriEdge Technologies  at 40–60% below equivalent Western brand pricing.


FAQ


How long does it take to locate an underground cable fault?

  • With the right equipment, pre-location takes minutes and pinpointing takes 30–60 minutes. The full process  from arriving on site to marking the dig point  typically takes 1–3 hours.


Can a TDR find faults on live cables?

  • Standard TDRs work on de-energized cables. For live-network fault location, a system with specialized live-testing capability is required, such as the Standard portable test system.


Why cant I find the fault with just a TDR? 

  • High-resistance and intermittent faults are invisible to a TDR pulse until they are
    conditioned with high voltage. This is why the complete 3-step process is necessary.


How accurate is TDR fault location?

  • Professional TDRs oer accuracy of ±0.5 m, which narrows the dig window dramatically but pinpointing is still required for the exact excavation point.

Need the instrument behind this method?

We build the TDR, surge and pinpointing equipment described in these articles.

View Products