Factory direct — 40–60% below Megger / BAUR list pricing · Worldwide shipping · Request a quote
TriEdge TechnologiesTriEdge Technologies Get a Quote
Model A10-1

A10 Cable Fault Flash Tester - High Precision TDR

$2,800 USD · ex-works, freight quoted separately
  • CategoryCable Fault Tester
  • ModelA10-1
  • Lead time7–15 days typical
  • Warranty12 months
  • ShippingWorldwide, DAP / FOB

Need a configuration for a specific cable class or test regime? Send us your parameters and we will confirm suitability before quoting.

Product Video

The A10 Cable Fault Flash Tester locates underground cable faults in minutes with ±0.5 m accuracy across a 0–100 km range — CE certified and factory direct at $2,800.

What Is the A10 Cable Fault Flash Tester?

The A10 is a professional Time Domain Reflectometer (TDR) used by utilities and contractors to measure the distance to cable faults before excavation. It uses low-voltage pulse and pulse-current methods to detect reflections along power cables. The instrument covers 0–100 km and displays results on a 12.1-inch HD color touchscreen.

What Cable Faults Can the A10 Detect?

The A10 detects short circuits, open circuits, and low-resistance ground faults — the most common failure modes on distribution feeders and industrial cable runs. It also identifies cable joints and verifies full cable length during commissioning. High-resistance faults above roughly 500 Ω require HV conditioning before the A10 can measure them.

How Accurate Is the A10 Fault Tester?

The A10 achieves ±0.5 m distance accuracy with a sampling rate of 3.125–400 MHz and adjustable pulse widths from 20 ns to 40 µs. A 2% velocity factor error shifts a reading by 20 m on a 1 km cable, so the A10 allows velocity factor adjustment in 0.01 steps. Two-end testing confirms readings before excavation.

How Does the A10 Compare to the Megger TDR2000?

The A10 costs $2,800, while the equivalent Megger TDR2000 ranges from $4,000 to $6,000 — a 40–58% saving with identical TDR capability. The A10 includes built-in WiFi and SIM remote transmission as standard. It runs a Linux-based operating system for stable field operation.

What Is Included with the A10?

Each A10 ships with a signed factory test certificate, CE compliance documentation, a foam-lined aluminum transit case, and export packaging for sea freight. Standard orders ship within 10–15 days Qingdao/Tianjin/Shenzhen. Every unit includes a 1-year warranty, lifetime maintenance support, and free online training.

Key Features

  • Full-length cable testing, wave velocity verification, and fault pre-location
  • Fault distance measurement, joint positioning, and wave velocity calibration
  • Three-proof chassis; 12.1-inch HD color touchscreen with one-key rotary mouse
  • Auto waveform positioning reduces dependence on testing experience
  • Built-in WiFi and SIM for remote waveform transmission

Technical Specifications

Pre-location Methods LV pulse, pulse current
Range 5 m – 100 km
Accuracy ±(0.5% × L) + 1 m
Sampling 3.125 – 400 MHz
Pulse Width 20 ns – 40 µs
Pulse Amplitude 120 V
Standby Time ≥ 6 hours
Certification CE (LVD + EMC)

Applicable Scenarios

  • Distribution feeder fault pre-location — locate faults on 10–35 kV distribution feeders before excavation
  • Street lighting & LV network maintenance — fast fault distance measurement on urban LV cables
  • Industrial plant cable troubleshooting — verify cable integrity in plant power systems
  • New cable commissioning — measure cable length and verify installation quality
  • Cable joint monitoring — identify impedance changes at joints along aging feeders

Testing Method

  1. Safety check — confirm the cable is de-energized and grounded at both ends
  2. Connect — attach test leads to the cable under test
  3. Set parameters — select cable type and adjust velocity factor
  4. Run the test — transmit the pulse and read the fault distance
  5. Mark the distance — record the reading; note joints on the trace
  6. Confirm — repeat from the opposite end and verify consistency
  7. Hand off — pass the distance reading to the pinpointing stage (C11)

Quality & Delivery

  • 100% factory tested — full power-on calibration with test certificate included
  • CE certified — compliant with EU EMC and LVD directives
  • Export packaging — foam-lined aluminum transit case, export carton or wooden crate
  • Lead time — 10–15 days, Qingdao/Tianjin/Shenzhen
  • After-sales — 1-year warranty, lifetime maintenance, free online training

FAQ

How far can the A10 measure along a cable?

The A10 covers 0–100 km, with a blind zone of approximately 5 m from the test end.

What accuracy does the A10 provide?

The A10 provides ±0.5 m distance accuracy when the velocity factor is correctly calibrated to the cable type.

Can the A10 find high-resistance faults?

Not directly — high-resistance faults (above ~500 Ω) require HV conditioning first. The A10 measures them once conditioned to a low-resistance arc.

Is the A10 CE certified?

Yes, the A10 complies with EU LVD (2014/35/EU) and EMC (2014/30/EU) directives, with documentation included.

What is the warranty on the A10?

The A10 comes with a 1-year warranty, lifetime maintenance support, and free online training.

How does the A10 compare in price to Megger?

The A10 at $2,800 is 40–58% below the equivalent Megger TDR2000 ($4,000–$6,000), with WiFi remote transmission included as standard.

Ask an engineer about this model

Send your cable class, fault types and site conditions — we will confirm the configuration.

Contact Us